SANEI (small machine room) passenger elevator integrates advanced security, energy?saving and mute etc, and upgrades its configuration to a brand-new level, and creates the?sample of vertical traffic for all the buildings, and satisfy the needs in the places including?the hotels, office buildings and shopping malls etc.
(Small Machine Room) Passenger Elevator
Vertical Traffic
Introduction
There is standard five-party communication configuration, in case of the emergency?during application and maintenance.
Many kinds of mute technologies are applied, which can reduce the noise pollution to the?environment significantly while providing quiet riding experiences for the passengers.
Lighting with LED green light source can convert over 90% electric energy into optical?energy, which can save energy by over 80% comparing with the traditional lighting.
The energy feedback device is chosen to convert the potential energy generated by the?elevator into the electric energy feedback grid, and reduce the energy consumption?significantly and guarantee its green operation.
The smart control mode is chosen to reduce the operating time of the elevator and improve?its transportation capacity, and pick up and send off the designated passengers in fixed time,
Parameter Table
| Rated Load (kg) |
persons | Drag method | Rated Speed(m/s) |
Net dimension of car（mm） | Dimension of door?opening （mm） |
Dimension of hoistway（mm） | Dimension of machine room（mm） | Over Head（mm） | Pit depth（mm） | |||||
| Width | Depth | Width | Height | Width | Depth | Width | Depth | Height | ||||||
| A | B | E | F | C | D | R | T | H | Q | P | ||||
| 450 | 6 |
V V V F |
1.0 | 1100 | 1100 | 800 | 2100 | 1900 | 1500 | 1900 | 1500 | 2500 | 4400 | 1400 |
| 630 | 8 | 1.0/1.6/1.75 | 1400 | 1100 | 800 | 2100 | 1900 | 1750 | 1900 | 1750 | 2500 | 4400/4500/4600 | 1400/1600/1600 | |
| 800 | 10 | 1.0/1.6/1.75 | 1400 | 1350 | 800 | 2100 | 1950 | 2100 | 1950 | 2100 | 2500 | 4400/4500/4600 | 1400/1600/1600 | |
| 1000 | 13 | 1.0/1.6/1.75/2.0 | 1600 | 1500 | 900 | 2100 | 2100 | 2150 | 2100 | 2150 | 2500 | 4400/4500/4600/4900 | 1400/1600/1600/2100 | |
| 1150 | 15 | 1.0/1.6/1.75/2.0 | 1850 | 1400 | 900 | 2100 | 2400 | 2100 | 2400 | 2100 | 2500 | 4400/4500/4600/4900 | 1400/1600/1600/2100 | |
| 1250 | 16 | 1.0/1.6/1.75/2.0 | 1950 | 1400 | 900 | 2100 | 2500 | 2100 | 2500 | 2100 | 2500 | 4400/4500/4600/4900 | 1400/1600/1600/2100 | |
| 1350 | 18 | 1.0/1.6/1.75/2.0 | 1950 | 1500 | 1100 | 2100 | 2600 | 2250 | 2600 | 2250 | 2500 | 4400/4500/4600/4900 | 1400/1600/1600/2100 | |
| 1600 | 21 | 1.0/1.6/1.75/2.0 | 1950 | 1750 | 1100 | 2100 | 2550 | 2450 | 2550 | 2450 | 2500 | 4400/4500/4600/4900 | 1400/1600/1600/2100 | |
Details PC version
Well layout
Standard Function
| Function | Description of functions |
| >Automatic operation | The lift automatically runs and stops, opens / shuts the door according to designated command. |
| >Operation by operator | The lift automatically runs and stops, manually shuts the door according to designated command. |
| >Overhaul operation | Under repair and inspection conditions, the lift runs at inspection speed through operating "slow up / slow down" buttons. |
| >Automatic door-shut time-delay |
After the car door has been opened completely, it keeps the door open condition. It automatically shuts the dnnr after time-delav. |
| >Call for opening?of this floor | When the lift is shutting the door or it does not start but has closed the door, when there is any outer calling from this landing, it will reopen the door. |
| >Light curtain protection | When optical curtain has been shaded,it immediately stops door-shut action and automatically opens the door. |
| >Overload none?door-shut | It does not shut the door in overload. And it is bright from overload lamp. The buzzer rings. It shows CZ or overload In the car and does not start the Ilft |
| >Full-load direct running | When it reaches the rated load, it only responds to internal selection instead of outer calling. |
| >Automatic lighting control | In the stipulated time, If the lift does not receive any travel command, the lighting will a utomatically die out. It automatically opens at command. |
| >Firefight return | When It starts home landing fire-fighting switch, all the commands will be cancelled then. The lift Immediately drives to the designated landing and park there. |
| >Mal-operation removal | Repeatedly operate internal selective button to cancel mal-operation registration |
| >Main contactor protection | After the lift executes door-shut command, if the door has not been closed within the stipulated time, it will re-open the door and then shut it again. |
| >Service floor setting | The lift only serves the set floor. |
| >Home landing floor setting | Under the automatic condition, if there is?automatic ally run to the set landing.?no command within certain period, the car will |
| >Landing floor, direction display in the car | It shows the landing floor of the lift, the direction where the lift is going to travel in the car, |
| >Direction chosen by driver | The running direction Is determined by the driver's directive. |
| >Trouble diagnosis | When there Is something wrong in the travel process, it will automatically diagnose the trouble cause, display in the operation panel and automatically store the latest trouble Information. |
| >Safety circuit protection | If safety circuit is disconnected, the lift will immediately stop the travel. |
| >Door Interlocking protection |
If It closes all of door Interlocking, it can then start the Ilft. If door Interlocking is disconn ected or trembled, the lift will stop the operation. |
| >Travel contactor protection |
The system can detect whether motor circuit contactor action is reliable or not. If any abnorma condition happens, it will stop the lift travel. |
| Function | Description of functions |
| >Brake test protection | It Implement real-time monitor to the brake open / shut through brake arm test switch. If the brake has been opened improperly, the system will not allow the lift to start. |
| >Terminal speed change and?landing floor number correction | After the system detect terminal switch in travel, the lift will be forced to change the speed and automatically correct the landing floor display. |
| >Position-Limit protection | If the system detects limit switch action, It will immediately stop the lift travel. |
| >Limit protectior | If the system detects limit switch action, the whole system will Immediately lose power |
| >Over-speed protection | When the lift up / down exceeds 1.2 times of the rated speed, it will cut off control mains and stop the lift travel. |
| >Landing floor, direction display | The floor landing shows the landing floor that the lift travels and where it travels also. |
Optional Function
| Function | Description of functions |
| >Opposite door service setting | Correctly open / shut the door in the corresponding floor according to service setting. |
| >Fire-fighting running | After fire switch is closed, the system enters into fire-fighting running. |
| >Parallel connection control | Two-lift parallel connection control automatically responds the command according to rapid energy-saving principle so as to Increase the lift travel efficiency. |
| >Group supervision | The system can simultaneously control the travel of eight-lift. The function is the same as that of paralle connection control. |
| >Anti-nuisance | When the lift travels to the furthest floor, it will remove all the internal selective register. If it has load testes it will have three light-load internal selections at most. |
| >Emergency automatic leveling travel |
After the electric net power failure, the lift emergency automatic-leveling control device supplies power to travel leveling so that the passengers can leave there safely. |
| >Hoist-way hall arrival gong | Under the condition of normal travel arrival, voice announcer is used to announce the related passengers' Information. |
| >Hoist-way hall arrival gong | The electric gong that is installed In the car announces the passenger lift arrival to vast passengers. |
| >Intellectual calling service | The electronic gong in the waiting zone announces the lift arrival to the waiting passengers. |
| >Intellectual calling service | The car command or hoist-way hall calling can be locked or connected through the special?Intellectual Input equipment |
| >Service to the handicapped | Man-machine interface specially serves the handicapped people. |
| >Electronic Punch Card System | The users shall swipe card In using the elevators. Those who do not have cards or have no jurisdiction can' t use the elevators.?It enlarges the safety management of the house property personnel and effectively saves power loss In the buildings. |
| >Energy feedback device | It offers regenerated lift power to the buildings. It is effectively applicable for lighting In the buildings etc. so as to reduce the consumed power. |