SANEI?SN debris elevator has the advantages of small volume, complete functions, smooth delivery, low price and other characteristics, widely used in transporting food restaurants and factory canteens, libraries and other debris transported, now on the market to use can be divided into two kinds, microcomputer control and PLC control, according to the work mode is divided into table and floor type, its speed from 0.4 meters to 1 meters, now mostly used to facilitate the installation of frame type, this structure has the advantages of convenient installation, use small space, and do not use special wells.
Dumbwaiter Elevator
Dumbwaiter Elevator
Introduction
SANEI Dumbwaiter Elevator, suitable for hotels, restaurants, banks, hospitals, canteens, libraries, kindergartens, factories, shopping malls, post office and other departments, for transporting food, tableware, daily necessities, books, medicine and other articles, many kinds of specifications. Elevator for the steel structure, comes with the computer room, the user does not need to design a well embedded stent, no special room, simple and convenient. Products in the design of the use of standardization, serialization, human nature, universal requirements, so that the production of debris elevator structure is strong, stable and reliable operation, is the best choice for you to use the elevator. Can also be based on the user's building structure, the production of non-standard debris elevator.
Simple operation, safe and reliable
Small space
No special wells, to the overall layout of the building and design convenience.
Low input cost
A one-time investment cost is low, can be repeatedly shifted to repeat the installation and use.
Simple operation
Easy to use, safe and reliable, easy maintenance.
Parameter Table
| Rated load(kg) | Persons | Net dimension of car（mm） | Dimension of door opening（mm） | Dimension of hoistway（mm） | Dimension of machine room（mm） | Over head（mm） | Pit depth（mm） | |||||
| Width | Depth | Width | Height | Width | Depth | Width | Depth | Height | ||||
| A | B | E | F | C | D | R | T | H | Q | P | ||
| 1000 | 0.5/1.0 | 1300 | 1800 | 1200 | 2100 | 2400 | 2100 | 2750 | 3740 | 2500 | 4300 | 1400 |
| 2000 | 0.5/1.0 | 2000 | 2400 | 1600 | 2200 | 2950 | 2760 | 3000 | 4400 | 2500 | 4500 | 1500 |
| 3000 | 0.5 | 2500 | 2600 | 2000 | 2200 | 3550 | 2960 | 3700 | 3640 | 3000 | 4500 | 1500 |
| 4000 | 0.5 | 2100 | 3600 | 2000 | 2400 | 3450 | 3900 | 3450 | 3900 | 3000 | 4800 | 1500 |
| 5000 | 0.5 | 3000 | 3300 | 2400 | 2400 | 3950 | 3900 | 3950 | 3900 | 3000 | 4800 | 1500 |
| 8000 | 0.5 | 3300 | 3640 | 3950 | 2950 | 5370 | 4500 | 5370 | 4700 | 3000 | 6000 | 1560 |
| 10000 | 0.5 | 3500 | 3940 | 3950 | 2950 | 5670 | 4800 | 5670 | 5000 | 3000 | 6000 | 1560 |
Details PC version
Well layout
Standard Function
| Function | Description of functions |
| >Automatic operation | The lift automatically runs and stops, opens / shuts the door according to designated command. |
| >Operation by operator | The lift automatically runs and stops, manually shuts the door according to designated command. |
| >Overhaul operation | Under repair and inspection conditions, the lift runs at inspection speed through operating "slow up / slow down" buttons. |
| >Automatic door-shut time-delay |
After the car door has been opened completely, it keeps the door open condition. It automatically shuts the dnnr after time-delav. |
| >Call for opening?of this floor | When the lift is shutting the door or it does not start but has closed the door, when there is any outer calling from this landing, it will reopen the door. |
| >Light curtain protection | When optical curtain has been shaded,it immediately stops door-shut action and automatically opens the door. |
| >Overload none?door-shut | It does not shut the door in overload. And it is bright from overload lamp. The buzzer rings. It shows CZ or overload In the car and does not start the Ilft |
| >Full-load direct running | When it reaches the rated load, it only responds to internal selection instead of outer calling. |
| >Automatic lighting control | In the stipulated time, If the lift does not receive any travel command, the lighting will a utomatically die out. It automatically opens at command. |
| >Firefight return | When It starts home landing fire-fighting switch, all the commands will be cancelled then. The lift Immediately drives to the designated landing and park there. |
| >Mal-operation removal | Repeatedly operate internal selective button to cancel mal-operation registration |
| >Main contactor protection | After the lift executes door-shut command, if the door has not been closed within the stipulated time, it will re-open the door and then shut it again. |
| >Service floor setting | The lift only serves the set floor. |
| >Home landing floor setting | Under the automatic condition, if there is?automatic ally run to the set landing.?no command within certain period, the car will |
| >Landing floor, direction display in the car | It shows the landing floor of the lift, the direction where the lift is going to travel in the car, |
| >Direction chosen by driver | The running direction Is determined by the driver's directive. |
| >Trouble diagnosis | When there Is something wrong in the travel process, it will automatically diagnose the trouble cause, display in the operation panel and automatically store the latest trouble Information. |
| >Safety circuit protection | If safety circuit is disconnected, the lift will immediately stop the travel. |
| >Door Interlocking protection |
If It closes all of door Interlocking, it can then start the Ilft. If door Interlocking is disconn ected or trembled, the lift will stop the operation. |
| >Travel contactor protection |
The system can detect whether motor circuit contactor action is reliable or not. If any abnorma condition happens, it will stop the lift travel. |
| Function | Description of functions |
| >Brake test protection | It Implement real-time monitor to the brake open / shut through brake arm test switch. If the brake has been opened improperly, the system will not allow the lift to start. |
| >Terminal speed change and?landing floor number correction | After the system detect terminal switch in travel, the lift will be forced to change the speed and automatically correct the landing floor display. |
| >Position-Limit protection | If the system detects limit switch action, It will immediately stop the lift travel. |
| >Limit protectior | If the system detects limit switch action, the whole system will Immediately lose power |
| >Over-speed protection | When the lift up / down exceeds 1.2 times of the rated speed, it will cut off control mains and stop the lift travel. |
| >Landing floor, direction display | The floor landing shows the landing floor that the lift travels and where it travels also. |